General Notes
· The demister pad must be in contact with the mirror back for it to function correctly.
· The demister pad is self adhesive.
· We recommend the demister pad is wired into the light switch.
· Demister pad must not be pierced.
· We recommend two people install a heated mirror.
· An electrician is required to wire in the demister pad.
· A transformer or thermostat is not required.
· demister pad is double insulated eliminating the need for an earth cable.
· Allow 1mm gap all around for mirror expansion if fitting into a wall recess.

Adhere Demist Heat Pad to Back of Mirror
The NRG self-adhesive heating pad is to be placed on the back of standard 3 to 6mm thick mirrors.
If an air bubble appears between pad and the mirror it must not be pierced. These bubbles are a result of
handling and neither affect the operation nor is it detrimental in any way.