1, Check that mirror sits flat by holding mirror against the wall in the correct position.
2, Roughen surface of the wall with sandpaper for better adhesion,then clean and dry thoroughly. |
 |
|
|
3, Apply neutral silicon and/or adhesive tape to the surface of the wall. Ensure the silicon or tape only sticks to the mirror backing (not the heat pad) |
 |
|
4, Thread the power cable through an electrical tube or conduit to a junction box. Connect power cord of the heating pad. Fix the mirror onto the wall.
5, Connect power cord of the heating pad to the power ( 120 or 220V as required). |
 |
|
